Jigs and fixtures
Drill guides, assembly fixtures, soft jaws, alignment blocks and go/no-go gauges. Square, repeatable, and the same from the first one to the fiftieth.
Custom 3D printing, Asheville NC
Jigs, fixtures, brackets, housings and replacement parts for shops and small manufacturers in the Asheville area. Send a photo or a drawing, get a flat quote, have the part in days.
What we print
Send a photo, a sketch or a file. If it is a shape that solves a problem in your shop, I can probably build it.
Drill guides, assembly fixtures, soft jaws, alignment blocks and go/no-go gauges. Square, repeatable, and the same from the first one to the fiftieth.
Boxes for sensors, controllers and electronics, with the gasket, threaded inserts and cable entry built in. Weatherproof versions for anything that lives outside.
Hose and cable management, panel brackets, tool holders, and adapters between two things that were never meant to meet. Rubber liners and grips where they help.
Knobs, caps, covers, gears and brackets for equipment that is out of production. Press fits, nut pockets and bearing seats that land where the drawing says.
Industries
Pick your trade to see what I print for it, which plastics are on the shelf for that work today, and where each one stops.
Site jigs, templates and the small parts the supply house does not carry. Built to be dropped, rained on and thrown back in the truck.
What I print
On the shelf for this work
| Build | Plastic | In stock | Why it fits here |
|---|---|---|---|
| Tough | PETG | Black, white, grey | The default for site parts. Takes rain, mud and a drop off a ladder without cracking. |
| Rigid + rubber | PETG or PLA body with TPU rubber fused in | Body black, white, grey. Rubber black, white | Gasketed boxes, lined pipe and cable clips, non-marring pads. The seal is printed into the part. |
| Outdoor | ASA | Grey | Anything fixed outside in full sun for years: roof, fence and signage hardware. |
| Outdoor, light | Foamed ASA | White | About half the weight of solid plastic. For large covers and overhead parts where weight matters more than strength. |
| Tough, stiff | PETG-CF | Black, on request | Long jigs and templates that have to stay flat and stiff. |
| Engineering | Carbon fibre nylon with glass-filled nylon | Black | Brackets and tool fixtures under real load, and parts that see wear. |
| Standard | PLA | Black, white, grey | Mockups, fit checks and indoor templates. Softens around 120 °F, so it does not live on a dashboard. |
Printed plastic is not a rated structural or life-safety part. I do not print anything that holds a person, hangs a load overhead or stands in for a code-listed part.
Black ASA, polycarbonate for heat and impact, softer rubber grades, and safety orange or yellow.
Bench hardware made to fit your tubes, your instruments and your space, in days instead of a catalogue lead time.
What I print
On the shelf for this work
| Build | Plastic | In stock | Why it fits here |
|---|---|---|---|
| Tough | PETG | Black, white, grey | The default bench plastic. Fine with water, splashes and wipe-downs with 70% alcohol. |
| Standard | PLA | Black, white, grey | Dry bench organisers, prototypes and fit checks. Softens around 120 °F, so not for ovens, hot plates or dishwashers. |
| Rigid + rubber | PETG or PLA body with TPU rubber fused in | Body black, white, grey. Rubber black, white | Sealed lids, soft tube seats, grips and non-slip feet in one piece. Wipe the rubber, do not soak it in alcohol. |
| Outdoor | ASA | Grey | Handles more heat than Standard or Tough and does not break down under UV lamps. Keep acetone away from it. |
| Engineering | Carbon fibre nylon with glass-filled nylon | Black | Stiff fixtures and instrument brackets. Nylon takes up moisture, so not for parts that sit wet. |
| Extreme | PPA-CF | Black | The stiffest, most heat-resistant plastic on the shelf, for fixtures beside heat blocks and warm equipment. |
| Dissolvable support | PVA | Washes away | Printed as temporary support and rinsed out in water, which allows internal channels and closed cavities in Standard and Tough parts. |
Autoclavable filaments and certified biocompatible ones (ISO 10993 or USP Class VI) exist, and I can print them. They are ordered in for your job, not kept on the shelf. The stock plastics in the table above are for bench hardware that does not touch samples, patients or a sterile field. Printed surfaces have fine layer lines, so say so if a part needs validated cleaning.
Medical-grade polycarbonate that is autoclavable and comes with the maker's ISO 10993 or USP Class VI certificate, medical-grade ABS for parts sterilised by gas or plasma instead of steam, polypropylene for autoclave cycles and harsh chemicals, PPS-CF for chemicals and heat, and static-safe (ESD) grades. Give me the spec or the standard. I find a filament whose data sheet meets it and send the certificate with the quote. Validating the finished part for your process stays with you.
The everyday working part. Something broke, something does not fit, or the thing you need was never made.
What I print
On the shelf for this work
| Build | Plastic | In stock | Why it fits here |
|---|---|---|---|
| Standard | PLA | Black, white, grey | The lowest-cost way to get a working indoor part, with the sharpest detail. |
| Tough | PETG | Black, white, grey | Parts that get knocked, get wet or live in a garage or a warm shop. |
| Rigid + rubber | PETG or PLA body with TPU rubber fused in | Body black, white, grey. Rubber black, white | Grips, bumpers, feet and seals printed into the part. No glue, no assembly. |
| Outdoor | ASA | Grey | Parts that sit in the sun: vehicle exteriors, decks, gardens, mailboxes. |
| Tough, stiff | PETG-CF | Black, on request | Stiff, matte black parts that must not flex. |
| Engineering | Carbon fibre nylon with glass-filled nylon | Black | Gears, hinges under load, and parts that carry weight every day. |
Tell me where the part lives and what it has to survive. That decides the build more than the shape does.
Any colour outside black, white and grey, clear, glow, or a specific plastic you have used before.
Not everything has to hold a load. Gifts, fidgets, awards and one-off ideas, with a name or logo built into the surface.
What I print
On the shelf for this work
| Build | Plastic | In stock | Why it fits here |
|---|---|---|---|
| Standard | PLA | Black, white, grey | Best detail and lowest cost. Two or more colours fused into one piece, so lettering sits flush in the surface. |
| Logo inlays | Glitter PLA | Blue, pink | Sparkle lettering and logos set into a black, white or grey part. |
| Rigid + rubber | PETG or PLA body with TPU rubber fused in | Body black, white, grey. Rubber black, white | Squishy grips, bouncy feet and soft parts fused to a hard body. |
| Tough | PETG | Black, white, grey | Anything a kid will drop, step on or leave outside. |
Small parts and magnets are not for children under three. Standard softens in a hot car.
Any colour or finish you want: silk, marble, glow, clear, team colours. One roll is priced into the quote, or spread across a batch.
Jigs that put the hole in the same place on every door, left hand and right hand, first cabinet to last.
What I print
On the shelf for this work
| Build | Plastic | In stock | Why it fits here |
|---|---|---|---|
| Tough, stiff | PETG-CF | Black, on request | The jig plastic. Stays flat and stiff over a long fence, matte black. |
| Tough | PETG | Black, white, grey | Everyday jigs, dust adapters and templates that get knocked around the shop. |
| Rigid + rubber | PETG or PLA body with TPU rubber fused in | Body black, white, grey. Rubber black, white | Clamp pads, jaws and jig faces with rubber fused on, so finished faces do not mark. |
| Standard | PLA | Black, white, grey | Setup blocks, layout templates and one-off install guides. |
| Engineering | Carbon fibre nylon with glass-filled nylon | Black | Guides and fixtures that see wear every day. |
Printed drill guides wear with use. For production jigs I size the holes for press-in steel drill bushings.
Polycarbonate for templates that see router heat, or a colour that matches your shop's jig system.
Fixtures, nests and prototypes for people who will put calipers on the part. Fits are checked against a printed gauge in the same plastic.
What I print
On the shelf for this work
| Build | Plastic | In stock | Why it fits here |
|---|---|---|---|
| Engineering | Carbon fibre nylon with glass-filled nylon | Black | Stiff carbon fibre nylon zones and tougher glass-filled zones fused into one part. |
| Extreme | PPA-CF | Black | Holds its shape under heat and constant load. The first thing to try for a metal replacement trial. |
| Tough, stiff | PETG-CF | Black, on request | Stiff, flat and stable for gauges and nests at lower cost than nylon. |
| Tough | PETG | Black, white, grey | Guards, covers and brackets that take a knock. |
| Rigid + rubber | PETG or PLA body with TPU rubber fused in | Body black, white, grey. Rubber black, white | Nests and jaws with rubber faces that do not mark the part under test. |
| Outdoor | ASA | Grey | Housings and mounts that live outside or under UV. |
| Standard | PLA | Black, white, grey | Fast, cheap form and fit prototypes. |
| Dissolvable support | PVA | Washes away | Rinses out in water, for internal channels and cavities in Standard and Tough parts. |
Printed plastic is porous and outgasses. It is for bench and ground support use, not for inside a vacuum chamber or on flight hardware, unless you specify a plastic rated for it.
PAHT-CF, polycarbonate, PPS-CF, static-safe (ESD) grades, and unfilled nylon for living hinges and springy snaps.
Front-of-house pieces with your name on them, and back-of-house fixes for the things that keep breaking.
What I print
On the shelf for this work
| Build | Plastic | In stock | Why it fits here |
|---|---|---|---|
| Standard | PLA | Black, white, grey | Signs, tap handles and displays with the logo fused into the surface in a second colour. |
| Logo inlays | Glitter PLA | Blue, pink | Sparkle lettering and logos for tap handles and signs. |
| Tough | PETG | Black, white, grey | Back-of-house parts that get wet and get knocked. |
| Rigid + rubber | PETG or PLA body with TPU rubber fused in | Body black, white, grey. Rubber black, white | Non-slip feet, grips and bumpers printed into the part. |
| Outdoor | ASA | Grey | Patio and sidewalk pieces that sit in the sun all season. |
None of the stock plastics is certified for food contact, and none is dishwasher safe. I print what sits near food and drink, not what touches it.
Food-contact grades supplied with the maker's compliance statement, and your brand colours.
The broken plastic part that turns a five-minute fix into replacing the whole unit. Send a photo of it.
What I print
On the shelf for this work
| Build | Plastic | In stock | Why it fits here |
|---|---|---|---|
| Tough | PETG | Black, white, grey | Most replacement parts. Handles bathrooms, kitchens and tenants. |
| Standard | PLA | Black, white, grey | Indoor trim pieces, number plates and tags, in black, white or grey to match. |
| Rigid + rubber | PETG or PLA body with TPU rubber fused in | Body black, white, grey. Rubber black, white | Parts with a bumper, foot or seal built in. |
| Outdoor | ASA | Grey | Exterior caps, mailbox and fence hardware, anything in the sun. |
None of the stock plastics is flame-retardant rated. I do not print parts that go inside an electrical box, an appliance's heating section or a fire-rated assembly.
Flame-retardant polycarbonate, and colours matched to a fixture or trim.
Name it in your request. I check that this printer can run it, price the roll into your quote, and order it once you approve. If the work repeats, it goes on the shelf for you. That covers autoclavable or certified grades for a lab, flame-retardant or food-contact grades, carbon fibre grades I do not stock yet, or a brand colour.
The printer runs plastics that melt up to 350 °C in a chamber heated to 65 °C. That takes in most engineering plastics. PEEK and PEI need a hotter chamber than this machine has, and I will say so up front.
Build options
You do not need to know plastics. Each build below says what you get, where it works, and where it stops. Not sure? Tell me where the part lives and I will pick.
Strong + rigid
The cheapest way to hold a real part in your hand. Black, white and grey in stock, with the sharpest detail.
Strong + takes a knock
Gives a little instead of cracking. Fine with rain, water, coolant splash and a warm shop.
Strong + rigid + flexible
A hard body with soft rubber printed into it as one piece. No glue, no assembly. This is how a weatherproof box gets its gasket built in.
Strong + rigid + sun-proof
For parts that sit in full sun year after year. Keeps its colour and strength, and handles more heat than Standard or Tough.
Strong + rigid + tough
Carbon fibre nylon where the part must be stiff, glass-filled nylon where it has to take knocks and give a little, fused into one piece.
Stiffest + hottest
For the part that sits next to heat or carries load all day and has to hold its shape.
Two or more colours of the same build, so logos, labels, part numbers and QR codes sit in the surface. Rubber into Standard and Tough. Stiff and tough zones in Engineering.
Rubber on an Outdoor, Engineering or Extreme part, and any mix of a low-heat build with a high-heat one. Those are printed separately and joined with a groove, a press fit or screws. Your quote will say so before anything prints.
| Build | Plastic | In stock | Notes |
|---|---|---|---|
| Standard | PLA | Black, white, grey. Glitter blue and pink for inlays | Up to five colours in one part. |
| Tough | PETG, or PETG-CF on request | PETG black, white, grey. PETG-CF black | PETG-CF is matte black and stiffer. |
| Rigid + rubber | PLA or PETG with TPU | Rubber black, white | Mechanically keyed at the joint. PETG body for weatherproof parts. |
| Outdoor | ASA, or foamed ASA for light parts | ASA grey. Foamed ASA white | UV stable. Seals printed separately in TPU. |
| Engineering | Carbon fibre nylon with glass-filled nylon | Black | Same polymer family, so the two fuse. |
| Extreme | PPA-CF | Black | High-temperature carbon fibre nylon. |
| Dissolvable support | PVA | Natural | For internal cavities in PLA and PETG parts. Rinses out in water. |
Material data sheets on request. Any plastic not listed can be ordered in for a job once the quote is approved.
Available filaments
Every filament ready to print today, with the manufacturer's own documents one click away. TDS is the technical data sheet, SDS is the safety data sheet (also called MSDS), and RoHS and REACH are the lab test reports for restricted substances.
| Filament | Build on this site | In stock | Documents |
|---|---|---|---|
| PLA BasicBambu Lab | Standard | Black, white, grey | |
| PETG BasicBambu Lab | Tough, and the body of Rigid + rubber | Black, white, grey | |
| TPU for AMSBambu Lab | The rubber in Rigid + rubber | Black, white | |
| ASABambu Lab | Outdoor | Grey | |
| ASA AeroBambu Lab | Outdoor, light | White | |
| PA6-GFBambu Lab | Engineering, tough zones | Black | |
| CarbonX PA6+CF3DXTECH | Engineering, stiff zones | Black | |
| PPA-CFBambu Lab | Extreme | Black | |
| PETG-CFBambu Lab | Tough, stiff. On request | Black | |
| Glitter PLAMake Market | Logo inlays only | Blue, pink | None published by the maker |
| PVAMonoprice | Dissolvable support only | Natural | None published by the maker |
They are the manufacturer's documents for the filament as supplied. They do not certify a finished printed part. If your job needs a document that is not linked here, such as a RoHS or REACH report for a filament that shows none, or a certificate of conformance, ask in your quote request and I will get it from the manufacturer where one exists.
Any plastic this printer can run can be ordered in for your job once the quote is approved, and its documents come with the quote.
How it works
A photo, a sketch with dimensions, the broken part, or a STEP or STL file. Say how many you need and what the part has to survive.
Within one business day. One price per part, material and finish spelled out, no surprises later.
Card or bank transfer through an invoice link. Established customers can pay on delivery.
Pick up in Asheville, hand delivery to local shops, or shipped anywhere in the US. Local jobs can be rushed.
Local rush
If your shop is within about 45 minutes of Asheville, a rush job can often be in your hands the same day it comes off the printer. I package every local order and bring it to you myself, so there is no carrier, no label, and nothing sitting in a depot overnight.
Hendersonville, Black Mountain, Weaverville, Waynesville, Brevard, Marion and everywhere in between. Mark your request as rush and the quote will say whether it can be done by when you need it and what the rush costs.
Pricing
Every job is quoted flat before anything prints. These are the ranges most work lands in.
Single parts
Most brackets, jigs, clips and housings. Larger or carbon fibre parts quoted individually. $25 minimum order.
Batches
Ten of the same part cost a lot less each than one. Ask for a batch price on anything you reorder.
Design work from a sketch or a broken part is quoted separately and credited back on repeat orders of that part. You keep the files.
Sample parts
Three real parts you can handle and keep: a hardware fit gauge, a cabinet drilling jig, and a pipe clip with a rubber liner printed into it. If you run a shop in the Asheville area, I will bring them by.
Request a quote
Pick what you know and leave the rest. This builds a request sheet; send it and you will have a quote back within one business day.
Based in Asheville, North Carolina. Shop visits with sample parts by appointment.